AWD-HPV SUP VALVE

AWD-HPV SUP VALVE compatible on most of SUP brands and inflatable products.

Category:

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+
INQUIRY

SUP electric pump adaptor utilizes a standard Schrader valve fitting to couple with an air compressor or bike/tire pump.

With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump, bike pump or compressor and inflate to the recommended PSI (20 PSI for Red Paddle Co boards).

Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure.

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+
Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+

Your Name :

Your Email :

I'm not a robot: captcha

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+